Hope Pick & Mix Headset - Black
Upper / Hope #1 - EC34/28.6
$114.95 AUD
Skip to product information
(We can only consider Australian retailers)
| Variant | SKU | Barcode |
|---|---|---|
| Upper / Hope #1 - EC34/28.6 | HOP HP PMT-BK-1) | 5055168034140 |
| Upper / Hope #2 - ZS44/28.6 | HOP HP PMT-BK-2) | 5055168034157 |
| Upper / Hope #3 - IS41/28.6 | HOP HP PMT-BK-3) | 5055168034164 |
| Upper / Hope #4 - ZS49/28.6 | HOP HP PMT-BK-4) | 5055168034171 |
| Upper / Hope #5 - ZS56/38.1 | HOP HP PMT-BK-5) | 5055168034188 |
| Upper / Hope #6 - EC49/38.1 | HOP HP PMT-BK-6) | 5055168038063 |
| Upper / Hope #7 - IS41/28.6 | HOP HP PMT-BK-7) | 5056033432573 |
| Upper / Hope #8 - IS42/28.6 | HOP HP PMT-BK-8) | 5056033454148 |
| Upper / Hope #9 - ZS56/28.6 | HOP HP PMT-BK-9) | 5056454913262 |
| Lower / Hope #A - EC34/30 | HOP HP PMB-BK-A) | 5055168034195 |
| Lower / Hope #B - ZS44/30 | HOP HP PMB-BK-B) | 5055168034201 |
| Lower / Hope #C - IS41/30 | HOP HP PMB-BK-C) | 5055168034218 |
| Lower / Hope #D - ZS49/30 | HOP HP PMB-BK-D) | 5055168034225 |
| Lower / Hope #E - ZS56/40 | HOP HP PMB-BK-E) | 5055168034232 |
| Lower / Hope #F - EC49/40 | HOP HP PMB-BK-F) | 5055168036854 |
| Lower / Hope #G - ZS55/40 | HOP HP PMB-BK-G) | 5055168038056 |
| Lower / Hope #H - EC44/40 | HOP HP PMB-BK-H) | 5055168038414 |
| Lower / Hope #J - IS52/40 | HOP HP PMB-BK-J) | 5056033432580 |
| Lower / Hope #K - ZS66/45.8 | HOP HP PMB-BK-K) | 5056454989304 |
<p>Earn%20[points_amount]%20when%20completing%20this%20purchase.</p>
Headsets can be a minefield. Don't panic! With our pick'n'mix range you can choose the top and bottom cups separately, covering you for almost every headset combination out there.
Key Features
- Replaceable stainless steel bearings (resist corrosion)
- Split crown race for easy installation and removal
- Wide selection of different cup sizes to fit most headset combinations
- Multiple seals to keep out the elements
- Available in Black, Silver, Smoke, Blue, Red, Purple & Orange
- Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination
- Head Doctor top cap sold seperately
- Headset cups use custom made, replaceable stainless steel bearings to resist corrosion
- The cups are all machined from 2014 T6 aluminium
- Sealing is achieved through an adjustable taper ring cover and integrated rubber seal
- Stack Heights for each cup are: CUP A = 14MM/CUP E = 6MM/CUP F = 14MM/CUP H = 14MM/CUP 1 = 17MM (INC 3 SHIMS)/CUP 2 = 8MM (INC 3 SHIMS)/CUP 7= 8.5MM (NO SHIMS)
/CUP 9= 9MM (NO SHIMS)