KMC x CeramicSpeed UFO Drip Racing 11-Speed Chain
Developed for extreme performance on race day, CeramicSpeed UFO Racing Chains are optimised for 600km or 370 miles. Thereafter, traces of the optimisation treatment will continue to ensure your chain stays at the top of the normal standard. Using only the best chains from high-quality suppliers, the UFO Racing Chains ensure the best results and a real advantage at the finish course.
Be aware that the UFO treatment is not optimised for wet and muddy conditions, which might cause corrosion on the chain. Read more about this in the maintenance tab. Testing results show, that UFO Racing Chain proves to be faster than other treated chains.
Mounting your new optimised chain is no different from the installation of any other chain. Be aware that the chain is covered with Teflon® powder, which might scatter when taken out of the bag. Use the set of gloves provided in the package and make sure to cover the floor when installing the CeramicSpeed UFO Racing Chain. Always connect the chain with the connecting link provided. We do not recommend reusing the connecting link. To install your chain, a chain tool is required. Shorten the chain at optimal length.
Within 600 km/370 miles, to benefit from the full advantages of the CeramicSpeed UFO Racing Chain, you must not wash the chain before the mileage is exceeded. However, if your chain needs cleaning, use a dry cloth or a soft brush and carefully remove the dirt off the chain. When taking the chain off for maintenance or cleaning, remember to reinstall it in the same direction as before. In the case of a mild shower, where the chain has not been exposed to water more than a few minutes, the chain performance properties should not be affected.
In the case of light showers, we recommend applying UFO Drip Chain Coating, after wiping off the excess Teflon powder with a dry cloth, if any left on the chain. Allow the UFO Drip Chain Coating to dry off before riding.
In the case of heavy showers, you should cover your chain in a protective grease on top of the UFO treatment. This will slightly influence the watt savings, but it will protect the chain while still improving your performance.
After 600 km/370 miles the chain may undergo maintenance, keeping in mind that traces of the optimisation are still left on the chain. When using UFO Drip Chain Coating, after the 600 km/370 miles, please follow the instructions on the bottle. Note that the huge watts saving of 2-5 watts is achieved within the first 600 km/370 miles interval and decrease slightly after the UFO treatment wears off.
Mfr Claimed Weight