Fulcrum Racing Zero Nite Clincher Wheelset
The Fulcrum Racing Zero Nite Clincher is trusted by racers due to its superior braking and performance characteristics - in a reliable aluminium package.
A completely new technology combines a very engaging total black look with high range specs, including a special braking surface that creates new standards for braking on aluminium road bike wheels.
The Plasma Electrolytic Oxidation process gives the braking surface very special characteristics regarding hardness and wear resistance. This is possible thanks to a very fine and compact matrix of alpha and micro-crystalline gamma alumina and amorphous alumina embedded on the surface. Thanks to the high hardness of the layer, this new wheel presents excellent wear resistance. Fulcrum R&D department has developed a new design for Racing Zero Nite’s braking surface. The design created by turning allows superior braking efficiency. Specific blue brake pads should be used with this new model.
Dynamic Balance - For top models, this is obtained by a special operation on the section of the rim opposite the rim joint.
For entry-level models, Dynamic Balance is obtained by using two oversized spokes in the section opposite the joint. The result is a wheel with perfectly balanced rotational dynamics.
USB Ceramic Ultra Smooth Bearings - Fulcrum has a long-standing reputation for the extremely high performance of its hubs in terms of smoothness and reliability. In fact, all the projects are entirely developed in our R&D department and we have put obsessive care into taking care of every detail. The hubs with USB ceramic bearings (Ultra Smooth Bearings) further enhance the triathlon and road bike wheels’ smoothness and reduce weight and the need for maintenance.
2:1 Two-to-One - When you push on the pedals, the rotational force on the sprocket induces a slackening of the freewheel spokes with a consequent loss of rim tension.
This results in undesirable flex of the whole wheel and an unavoidable loss of energy. Fulcrum has solved this classic cycling problem with its 2:1 Two-to-One Spoke Ratio patent, by doubling the spokes in the critical zones.
MOMAG - A magnet and lots of ingenuity. This was what led to the patent for the well-tested “Mounting Magnet” system, or MoMag.
Anti-Rotation System - This new system raises the concept of spoking to a new level of performance for road bike and triathlon wheels.
Rims - Triple Milling: this special triple milling makes it possible to reduce the peripheral weight of these road bike rims and to increase the reactivity of the wheels.
Differentiated rim height: 26mm at the front to have a good handling; 30mm at the rear to transfer all the power to the wheel.
Hub - Oversize aluminum flange and Two-to-One technology: the doubling of the spokes on the cassette side provides greater torsional stiffness and therefore a greater reactivity at each pedal stroke. This means greater efficiency in the transmission of power to these type of road bike wheels.
The front hub has been redesigned, now it is smaller and lighter than before, smoothness will be ensured by the well known USB™ bearing technology.
The cap and cone technology maintains the most efficient angle of contact between the bearings and bearing seat, increasing the smoothness and durability.
Spokes and nipples - Aluminum spokes and aluminum nipples: thanks to the light weight they reduce the peripheral mass, enemy of reactivity.
Tyre Type: Clincher
Tyre Size: 28"
Rim Material: Aluminium
Rim Material Details: Aluminium (6082, T6 Pre-Aging), triple milling, Plasma Electrolytic Oxidation treatment, Square Milling
Rim Height Category: Low
Rim Height: 27 mm (front)/ 30 mm (rear)
Rim Width: 22,5, ETRTO 17C
Tyre Width (Suggested): From 25 mm to 32 mm
Braking System: Caliper
Braking Surface/Braking Options: Aluminum braking surface, Plasma Electrolytic Oxidation treatment, milled
Front Axle Compatibility: QR
Rear Axle Compatibility: QR
Front Wheel Spokes: 16
Rear Wheel Spokes: 21 (Left 7 - Right 14), Two to one
Spokes Material: Aluminum
Spokes Profile Technology: Aero, straight pull
Front Hub: Carbon , Aluminum flanges
Rear Hub: Aluminum , Aluminum flanges
Bearing: USB ceramic bearings. Adjustable Cup & Conesbearing system
Others: Plasma treated HG freewheel. Aluminum Axle
Mfr Claimed Weight