{"title":"Other Tools","description":"","products":[{"product_id":"silca-hx-one-essential-tool-kit","title":"Silca HX-One Essential Tool Kit","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/silca\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/silca-logo_compact.PNG?v=1521031446\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eOne of our goals with this lifetime set of tools was to have it be completely one-hand accessible (we’ve all been there.). The fine Beechwood box uses a magnetic closure system and each tool rests in a CNC machined slot, held in place by a single elastomeric tab. Each tool fits into and out of it’s slot with a satisfying ‘click’ so that even when stretched one-handed from work stand to workbench, you can be confident in your placement.\u003cbr\u003e\r\n\u003cbr\u003e\r\nFor the HX-One we had to start with the finest S-2 Tool Steel, a shock resistant steel which has been refined by Swiss and German toolmakers for the optimal balance of strength, hardness, shock resistance and dimensional control. S-2 yields stronger tools with much harder surfaces for prolonged tool AND fastener life. The keys are then coated with thin-dense Chrome, a process generally reserved for mold tool components or optical grade surfaces inside molding tools. This coating provides the hardest, most dimensionally stable finish possible on each hex key. Finally, each tool is spray coated with a high-grip, high-visibility textured polymer finish for maximum grip and control. No more dropping your tools with greasy fingers or losing them on your workbench!\u003cbr\u003e\r\n\u003cbr\u003e\r\n40x Magnification shows the damage to both the Ti fastener AND the Cr-V Hex tool after only 28 tighten\/loosen cycles. The much higher precision AND harder SILCA S2 key with thin-dense Chrome coating is both 16% harder AND more dimensionally accurate resulting in only minor deformation of the fastener after 50 tighten\/loosen cycles. Note the discoloration of the titanium from the black oxide finish of the Cr-V tool transferring to the Ti fastener.\u003cbr\u003e\r\n\u003cbr\u003e\r\nIncluded with the HX-One Essentials Kit is the proprietary SILCA 17-4 Stainless Magnetic Adapter. The Adapter with a pleasant magnetic click turns the 6mm Hex Key into a ¼” socket drive which can fit any common ¼” driver Bit. Included in the kit are the 6 most common Torx sizes, 2 Phillips Head and 2 Flat head Drivers. You can literally handle any modern bicycle fastener with the tools in the box.\u003cbr\u003e\r\n\u003cbr\u003e\r\nEach HX-One kit is lovingly packed into a fully CNC machined box made from sustainable Beech Wood. Each box is hand sanded and finished before receiving the stainless steel SILCA Shield on the lid.\u003cbr\u003e\r\n\u003cbr\u003e\r\nFew tools are used as frequently, and can cause as much heartache or wasted time as the seemingly simple hex key. It’s one of the first things you notice at the top levels of motorsport tools, or in the toolboxes of Pro-Tour mechanics: extremely high quality hex keys. The reasoning is simple, better tool fit leads to better feel and confidence for the mechanic as well as a significant reduction in the likelihood of damaging exotic fasteners made from Titanium or Aluminum.\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\r\nFully CNC machined Beechwood box\u003cbr\u003e\r\nS2 steel hex keys 2mm-10mm\u003cbr\u003e\r\nRed polymer coating for superior grip on hex keys\u003cbr\u003e\r\nCustom S2 steel bit adaptor to standard 1\/4\" bit\u003cbr\u003e\r\n10 S2 steel bits found in every cycling workshop\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\nTBC\u003c\/p\u003e\r\n","brand":"Silca","offers":[{"title":"Default Title","offer_id":13237483601977,"sku":"SI\/005442","price":202.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/silca-hx-one-tool-kit.jpg?v=1582898906"},{"product_id":"tune-linientreu-laser-pointer-derailleur-adjustment-tool","title":"Tune Linientreu Laser Pointer (Derailleur Adjustment Tool)","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/tune\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/tune-logo_7ed79127-dd91-4c8f-ae58-2f672eca0dab_compact.png?v=1520730148\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe worlds first laser derailleur alignment tool!\u003c\/p\u003e\r\n\r\n\u003cp\u003eWith the TUNE Linientreu the derailleur can be perfectly adjusted by laser.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWhether you are a professional or novice mechanic, with the unique \"Linientreu\" you can set up your rear derailleur in minutes.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe best thing about it: with our precision laser the derailleur is always set exact.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe tool is suitable for 7, 8, 9, 10 11 and 12 speed setups. The Tune Linientreu gets attached by an allen or Torx key on the derailleur mounting bolts. With the aid of the linear laser, the lower and upper stops on the derailleur can be adjusted precisely.\u003c\/p\u003e\r\n\r\n\u003cpre\u003e\r\n\r\n \u003c\/pre\u003e\r\n","brand":"Tune","offers":[{"title":"Default Title","offer_id":19496696610873,"sku":"BWZ0400","price":429.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/tune-linientreu-laser-pointer-derailleur-adjustment-tool-top.jpg?v=1582899038"},{"product_id":"feedback-sports-valve-core-wrench-tool","title":"Feedback Sports Valve Core Wrench Tool","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/feedback-sports\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/feedback-sports-logo_compact.png?v=1538696943\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eIf there ever was an underrated tool that you probably don’t have in your bike tool kit, it has to be the Valve Core Wrench.\u003c\/p\u003e\r\n\r\n\u003cp\u003eDesigned to remove or install Presta Valve and Schrader Valve cores, this tiny tool can truly make the process of installing or refilling flat-prevention liquids and gels quick and painless. The versatility of the valve stem tool supports both valve types found on mountain bikes, road bike, commuting and electric bikes never be stranded on your commute thanks to the Valve Core Wrench. Available separate, or found in our Team Edition and Ride Prep Tool Kits.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\r\nFits Presta Valve and Schrader Valve bike tubes\u003cbr\u003e\r\nFile tread grip creates a comfortable and ergonomic grip\u003cbr\u003e\r\nCRV tool steel metal core makes this a one-time purchase\u003cbr\u003e\r\nAides in the overhaul of suspension forks and rear suspension shocks\u003cbr\u003e\r\nFound in our Ride Prep and Team Edition Tool Kits\u003cbr\u003e\r\nLimited Lifetime Warranty\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\nTBC\u003c\/p\u003e\r\n","brand":"Feedback Sports","offers":[{"title":"Default Title","offer_id":36806267043996,"sku":"817966010925","price":14.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/feedback-sports-valve-core-wrench-tool.jpg?v=1605057066"},{"product_id":"birzman-replical-mock-pedal-tool","title":"Birzman Replical - Mock Pedal Tool","description":"\u003cp style=\"text-align: left;\"\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/birzman\"\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/birzman-logo_160x160.png?v=1609842520\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Replical mock pedal temporarily replaces a pedal when making adjustments during bike assembly or repairs, saving time threading a pedal in and out of the crank arm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eMaterial: Alloy steel \/ Varnished wood\u003cbr\u003eSize: 4.7”\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003eTBC\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Birzman","offers":[{"title":"Default Title","offer_id":37402696908956,"sku":"BZBM12STDP01W","price":18.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/birzman-replical-mock-pedal-tool.jpg?v=1609842864"},{"product_id":"vittoria-tubeless-tool-kit-pliers-clips","title":"Vittoria Tubeless Tool Kit (Pliers \u0026 Clips)","description":"\u003cp style=\"text-align:left\"\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/vittoria\"\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/vittoria_logo_cb97d454-4e43-4504-b189-e83a2fd7ca63_compact.png?v=1557974639\" style=\"display:block; margin-left:auto; margin-right:auto\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Vittoria Road Tubeless Tool-Kit makes the installation of tubeless-ready tires quick and easy.\u003c\/p\u003e\r\n\r\n\u003cp\u003eEach kit contains a pliers and clips. The caliper - patented by Vittoria - provides a secure grip on the clincher, necessary to remove the beads from the rim. In addition, the caliper handles are designed to be used as tire lever levers, during assembly and disassembly, without running the risk of damaging the rim or tire. The Vittoria Road Tubeless Tool-Kit is required to remove the Air-Liner Road insert from the wheel.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\nTBC\u003c\/p\u003e\r\n","brand":"Vittoria","offers":[{"title":"Default Title","offer_id":40339954008220,"sku":"1AA00111","price":44.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/vittoria-road-tubeless-tool-kit-pliers-clips_eaad0a00-4c9b-407f-a504-22dff6a40e30.jpg?v=1629895293"},{"product_id":"pro-workshop-saw-guide","title":"PRO Workshop Saw Guide","description":"\u003cp\u003eDesigned to provide you with a better sports’ bicycle experience the PRO Saw Guide provides an accurate guide for cutting down handlebars or fork steerers. It boasts a harden steel construction and a firm clamp to keep the guide in the correct position and leading the saw blade to a straight and clean cut. Best used with the PRO Carbon Saw.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eSaw guide for handlebar and fork steerer sizing\u003cbr\u003eHardened steel for maximum stability\u003cbr\u003eEnsures a clean and straight cut\u003cbr\u003eFirm clamp to ensure accuracy\u003cbr\u003eDesigned to be ideally used with the PRO Carbon Saw\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003eTBC\u003c\/p\u003e","brand":"PRO","offers":[{"title":"Default Title","offer_id":40528063791260,"sku":"PRTL0053","price":49.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/pro-workshop-saw-guide.jpg?v=1627439929"},{"product_id":"pro-workshop-cable-cutter","title":"PRO Workshop Cable Cutter","description":"\u003cp\u003eDesigned to provide you with a better sports’ bicycle experience the PRO Cable Cutter neatly trims brake and shift cables to the required length. It is capable of cutting both the inner cable and outer tube with ease, thanks to the high-quality steel construction, and features an ergonomic grip which helps you exert the necessary force on the cables when cutting or clamping on end caps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eCutting tool for trimming shift and brake cables\u003cbr\u003eCapable of cutting inner and outer cables\u003cbr\u003eHigh-quality steel construction\u003cbr\u003eErgonomic grip\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003eTBC\u003c\/p\u003e","brand":"PRO","offers":[{"title":"Default Title","offer_id":40528069591196,"sku":"PRTL0094","price":50.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/pro-workshop-cable-cutter.jpg?v=1627439986"},{"product_id":"pro-workshop-disc-truing-tool","title":"PRO Workshop Disc Truing Tool","description":"\u003cp\u003eDesigned to provide you with a better sports’ bicycle experience the PRO Disc Truing Tool is developed for straightening brake discs. It also features a disc brake alignment tool which helps you set your disc brake callipers so that the pads do not rub on the brake disc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eDisc brake truing tool\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003eTBC\u003c\/p\u003e","brand":"PRO","offers":[{"title":"Default Title","offer_id":40528088400028,"sku":"PRTL0064","price":30.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/pro-workshop-disc-truing-tool.jpg?v=1627439957"},{"product_id":"birzman-15mm-pro-pedal-wrench","title":"Birzman 15mm Pro Pedal Wrench","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/birzman\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/birzman-logo_160x160.png?v=1609842520\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe 15mm Pedal Wrench is the essential tool to have on hand for pedal assembly and removal. The streamlined profile fits easily between the pedal and crank arm, whereas the comfortable TPR handle enables great leverage to remove or fit the pedals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e Functions: 15mm\u003cbr\u003e Material: Hardened steel \/ TPR\u003cbr\u003e Size: 12\"\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e TBC\u003c\/div\u003e","brand":"Birzman","offers":[{"title":"Default Title","offer_id":40567551983772,"sku":"BZBM14PWK000","price":33.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/birzman-pedal-wrench.jpg?v=1627951802"},{"product_id":"birzman-housing-and-cable-cutter","title":"Birzman Housing and Cable Cutter","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/birzman\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/birzman-logo_160x160.png?v=1609842520\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe Birzman Housing and Cable Cutter provides great handling comfort and is designed to offer additional leverage strength.\u003cbr\u003e\r\n\u003cbr\u003e\r\nThe integrated awl helps restoring cut housing ends and clear the way for smooth cable operation.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\r\nMaterial: Hardened Steel \/ High polymer\u003cbr\u003e\r\nSize: 7.5”\u003c\/p\u003e\r\n\r\n\u003cdiv\u003e\n\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\nTBC\u003c\/div\u003e\r\n","brand":"Birzman","offers":[{"title":"Default Title","offer_id":40567609163932,"sku":"BZBM11STCC02K","price":33.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/birzman-housing-and-cable-cutter.jpg?v=1627952293"},{"product_id":"birzman-crank-arm-cap-tool-ii","title":"Birzman Crank Arm Cap Tool II","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/birzman\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/birzman-logo_160x160.png?v=1609842520\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Crank Arm Cap Tool II is a double-sided crank arm removal and installation tool, design to cater for both Shimano® and SRAM® cranksets.\u003cbr\u003e\u003cbr\u003eOne side is compatible with Shimano® Hollowtech II™ or other 8-notch crank arm caps, with the other side specially designed for SRAM®, RaceFace® or other 16mm internal hex crank arm caps.\u003cbr\u003e\u003cbr\u003eFeatures 6mm hex holes on both sides for use with a hex wrench.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eMaterial: CNC machined 6061 aluminium\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003eTBC\u003c\/div\u003e","brand":"Birzman","offers":[{"title":"Default Title","offer_id":40567619420316,"sku":"BZBM18CAT2000","price":23.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/birzman-crank-arm-cap-tool-ii.jpg?v=1627952398"},{"product_id":"park-tool-hxs-3-stubby-hex-wrench-set","title":"Park Tool HXS-3 Stubby Hex Wrench Set","description":"\u003cdiv\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/park-tool\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/park-tool-logo_small.png?v=1550711188\"\u003e\u003c\/a\u003e\u003c\/div\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cp\u003eShop quality, L-shaped, high-torque industrial steel hex wrenches with a ball end on the long arm and a standard end on the stubby arm, designed specifically for reaching bolt heads in tight spaces (like caliper mounting bolts, chainring bolts, etc.). Other features include chamfered tips, tight tolerances, and a handy portable tool organizer\/holder. 1.5, 2, 2.5, 3, 4, 5 and 6mm hexes.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\r\n\u003cdiv\u003e\n\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\nTBC\u003c\/div\u003e\r\n","brand":"Park Tool","offers":[{"title":"Default Title","offer_id":40889944178844,"sku":"2556679999222","price":37.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/park-tool-hxs-3-stubby-hex-wrench-set.jpg?v=1631529470"},{"product_id":"park-tool-tsi-1-tubeless-sealant-injector","title":"Park Tool TSI-1 Tubeless Sealant Injector","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/park-tool\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/park-tool-logo_small.png?v=1550711188\" style=\"display:block; float:none; margin-left:auto; margin-right:auto\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eTake the mess out of tubeless tire setup and removal. The TSI-1 enables you to inject the perfect amount of sealant directly into mounted tubeless tires through the valve stem without removing the bead from the rim. The long, thin tube is able to fit all the way through many Presta stems with removable valve cores, for tidy injection and removal of all injectable tubeless bicycle tire sealants. The oversized syringe body features an easy-to-read gauge with fluid ounce and cc markings for precise application of sealant. \u003c\/p\u003e\r\n\r\n\u003cdiv\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/div\u003e\r\n\r\n\u003cp\u003eSyringe capacity: 3.5 fl. oz. (100 cc)\u003cbr\u003e\r\nTube dimensions: 120mm (4.75\") long x 3.5mm (0.14\") diameter\u003cbr\u003e\r\nNOTE: some tubeless valve stems feature an opening that is smaller than the tube of the TSI-1. In these cases, the bead must be removed from the rim in order to remove sealant from the tire.\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n","brand":"Park Tool","offers":[{"title":"Default Title","offer_id":40889980649628,"sku":"2917449999222","price":38.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/park-tool-tsi-1-tubeless-sealant-injector-retail.jpg?v=1631530202"},{"product_id":"park-tool-dag-3-derailleur-hanger-alignment-gauge","title":"Park Tool DAG-3 Derailleur Hanger Alignment Gauge","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/park-tool\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/park-tool-logo_small.png?v=1550711188\" style=\"display:block; float:none; margin-left:auto; margin-right:auto\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eAn alignment gauge is essential for diagnosing and repairing bent or misaligned derailleur hangers, often the source of shifting problems. The DAG-3 features an all-new design, engineered and built to be light, accurate and versatile. The sliding indicator can measure derailleur hanger alignment against bicycle rims of any size, and rotates out of the way to clear seat stays, racks, and other obstacles, allowing 360 degree measurement. The long, precision-extruded aluminum body is built to exacting tolerances and provides ample leverage for making adjustments. \u003c\/p\u003e\r\n\r\n\u003cdiv\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/div\u003e\r\n\r\n\u003cp\u003eCompatible with 16\" to 29\"+ wheels (ISO\/ETRTO rim sizes from 317 to 630+)\u003cbr\u003e\r\nReplaceable M10 threaded tip\u003cbr\u003e\r\nLow-profile head fits low clearance thru-axle derailleur hangers and Shimano® Direct Mount hangers\u003cbr\u003e\r\nLength: 16.5” (420mm)\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\n645g\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n","brand":"Park Tool","offers":[{"title":"Default Title","offer_id":40890009518236,"sku":"2894829999222","price":182.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/park-tool-dag-3-derailleur-hanger-alignment-gauge.jpg?v=1631530171"},{"product_id":"park-tool-sw-42-four-sided-spoke-wrench","title":"Park Tool SW-42 Four-sided Spoke Wrench","description":"\u003cdiv style=\"text-align:left\"\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/park-tool\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/park-tool-logo_small.png?v=1550711188\" style=\"display:block; margin-left:auto; margin-right:auto\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\n\u003cdiv style=\"text-align:left\"\u003e\n\u003cp\u003eUnique four-sided design provides extra strength and support and helps prevent slipping and deformation of aluminum nipples. Uses the same world famous design and high quality materials as our three-sided spoke wrenches.\u003c\/p\u003e\n\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\nFour-sided\u003cbr\u003e\nSized for 0.136\" (3.45mm) nipples\u003cbr\u003e\nSame size as the SW-2 (red)\u003cbr\u003e\nFits common Edco®, Wheelsmith® and DT® square nipples, among others\u003c\/div\u003e","brand":"Park Tool","offers":[{"title":"Default Title","offer_id":40890202652828,"sku":"2556529999222","price":21.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/park-tool-sw-42-four-sided-spoke-wrench.jpg?v=1631532296"},{"product_id":"park-tool-sw-1-spoke-wrench","title":"Park Tool SW-1 Spoke Wrench","description":"\u003cdiv style=\"text-align:left\"\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/park-tool\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/park-tool-logo_small.png?v=1550711188\" style=\"display:block; margin-left:auto; margin-right:auto\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\n\u003cdiv style=\"text-align:left\"\u003e\n\u003cp\u003eProfessional quality, precision-sized spoke wrenches are hardened and nickel plated for long service. Park Tool Spoke Wrenches are vinyl coated in one of five colors indicating the size at a glance.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\nThree-sided\u003cbr\u003e\nSized for 0.130\" (3.30mm) nipples\u003cbr\u003e\nThis size is typically found on older American-made bicycles, including many vintage Schwinn models and wheels built with Union or Torrington spokes. It is not as common on modern bicycles.\u003c\/div\u003e","brand":"Park Tool","offers":[{"title":"Default Title","offer_id":40890219790492,"sku":"2556609999222","price":18.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/park-tool-sw-1-spoke-wrench.jpg?v=1631532508"},{"product_id":"silca-hx-two-travel-tool-kit","title":"Silca HX-Two Travel Tool Kit","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/silca\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/silca-logo_compact.PNG?v=1521031446\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003eFew tools are used as frequently and can cause as much heartache or wasted time as the seemingly simple Hex and Torx® keys. It’s one of the first things you notice at the top levels of motorsport tools, or in the toolboxes of Pro-Tour mechanics: extremely high-quality tools. The reasoning is simple, better tool fit leads to better feel and confidence for the mechanic as well as a significant reduction in the likelihood of damaging exotic fasteners made from Titanium or Aluminum.\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\r\nHigh Strength S2 steel tools\u003cbr\u003e\r\nPrecise tool interface dimensions\u003cbr\u003e\r\nPolymer coating for superior grip\u003cbr\u003e\r\nLaser etched size indication\u003cbr\u003e\r\nCompact tool holder\u003cbr\u003e\r\nHex Wrenches: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm\u003cbr\u003e\r\nTorx® Wrenches: T7, T8, T9, T10, T15, T20, T25, T27, T30\u003cbr\u003e\r\nPLEASE NOTE: The T7 tool features a 100-degree bend rather than a 90 degree for improved control and access to very small fasteners\u003cbr\u003e\r\nLifetime Warranty\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\nTBC\u003c\/p\u003e\r\n","brand":"Silca","offers":[{"title":"Default Title","offer_id":40941719584924,"sku":"SI\/005848","price":132.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/silca-hx-two-travel-tool-kit.jpg?v=1632184223"},{"product_id":"pro-y-wrench-hex-tool-4-5-6mm","title":"PRO Y-Wrench Hex Tool (4\/5\/6mm)","description":"\u003cp\u003eDesigned to provide you with a better sports’ bicycle experience the PRO Y-Wrench Hex provides two hex key size options for precision adjustments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eY-wrench hex key\u003cbr\u003eMedium (PR 100349): 4, 5 and 6mm hex keys\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003eTBC\u003c\/p\u003e","brand":"PRO","offers":[{"title":"Default Title","offer_id":40998172131484,"sku":"PRTL0127","price":12.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/pro-y-wrench-hex-tool-4-5-6mm-actual.jpg?v=1632964524"},{"product_id":"pro-cone-wrench-set","title":"PRO Cone Wrench Set","description":"\u003cp\u003eThe PRO Cone Wrench Set is a two-wrench set for tightening or loosening the cone and locknuts on traditional cup and cone style hubs.\u003cbr\u003e\u003cbr\u003eDesigned to provide you with a better sports’ bicycle experience the PRO Cone Wrench Set allows you to maintain your traditional cup and cone style hub. The two-wrench set, which feature 13- and 14-millimetre as well as 15- and 16-millimetre wrenches, provide ample leverage for loosening or tightening cones and lock-nuts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eDouble sided cone wrench set\u003cbr\u003e13, 14, 15 and 16mm wrenches\u003cbr\u003eProvides leverage for easy loosening or tightening\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003eTBC\u003c\/p\u003e","brand":"PRO","offers":[{"title":"Default Title","offer_id":40998222364828,"sku":"PRTL0035","price":11.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/pro-cone-wrench-set-retail.jpg?v=1633000103"},{"product_id":"pro-pedal-wrench","title":"PRO Pedal Wrench","description":"\u003cp\u003eDesigned to provide you with a better sports’ bicycle experience the PRO Pedal Wrench is intended for use with pedals 15-millimetre slots on their axels. The long, hardened steel handle, of the Pedal Wrench provides ample leverage with the dual compound grip ensures comfort.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eDesigned for use on pedals with 15-millimetre slots\u003cbr\u003eHardened steel construction\u003cbr\u003eDual compound grip\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003eTBC\u003c\/p\u003e","brand":"PRO","offers":[{"title":"Default Title","offer_id":40998244941980,"sku":"PRTLB039","price":24.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/pro-pedal-wrench-retail.jpg?v=1633000072"},{"product_id":"pro-hex-key-set","title":"PRO Hex Key Set","description":"\u003cp\u003eDesigned to provide you with a better sports’ bicycle experience the PRO Hex Key Set allows for precision adjustments. The eight tool set features chrome plated tools, which slot into a key holder for safe keeping. Included in the set are 2-, 2.5-, 3-, 4-, 5-, 6-, 8- and 10-millimetre hex keys.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e8 fine adjustment hex keys\u003cbr\u003eChrome plated tools\u003cbr\u003eKey holder included\u003cbr\u003eHex keys: 2-, 2.5-, 3-, 4-, 5-, 6-, 8- and 10mm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003eTBC\u003c\/p\u003e","brand":"PRO","offers":[{"title":"Default Title","offer_id":40998268469404,"sku":"PRTL0037","price":36.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/pro-hex-key-set-actual.jpg?v=1632964413"},{"product_id":"shimano-hollowtech-ii-crank-arm-tool","title":"Shimano Hollowtech II Crank Arm Tool","description":"\u003cp style=\"text-align: left;\"\u003eFor installation and removal of HOLLOWTECH II\/2-PIECE CRANKSET crank arm fixing bolt\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e \u003c\/div\u003e","brand":"Shimano","offers":[{"title":"Default Title","offer_id":40998286459036,"sku":"Y13009220","price":2.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/shimano-hollowtech-ii-crank-arm-tool.jpg?v=1632964731"},{"product_id":"wera-bicycle-set-4-l-key-kit","title":"Wera Bicycle Set 4 L-Key Kit","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/wera\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/wera-logo_160x160.jpg?v=1642566908\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003eL-keys made from circular material with plastic sleeve for use on bicycles. The plastic sleeve makes working comfortable even at low temperatures and is easy on the fingers. All L-keys are easily accessible due to their colour coding and size markings. For hexagonal socket screws and TORX® screws. In a robust and lightweight folding pouch.\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003eThe BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screw on the tool. Featuring an extra-long arm this allows the user to securely tighten difficult tasks. Holding function is included on sizes 3 to 8 of the Hexs keys.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\r\n5 x HF Hex Keys (3, 4, 5, 6, 8mm)\u003cbr\u003e\r\n2 x Hex Key (2, 2.5mm)\u003cbr\u003e\r\n2 x Torx Keys (T10, T25)\u003cbr\u003e\r\nFolding pouch\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\nTBC\u003c\/p\u003e\r\n","brand":"Wera","offers":[{"title":"Default Title","offer_id":42404035461336,"sku":"W-05004173001","price":94.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/wera-bicycle-set-4-l-key-kit-retail.jpg?v=1642567191"},{"product_id":"wera-bicycle-set-9-mini-ratchet-set","title":"Wera Bicycle Set 9 Mini Ratchet Set","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/wera\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/wera-logo_160x160.jpg?v=1642566908\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003eA lot of bicycle tools in a small space. The sorting of the 9 stainless steel bits by profile and size allows quick access to the right tool. With one Wera Zyklop Mini 1 bit ratchet in a drop-forged solid steel design. The fine toothing mechanism with 60 teeth allows a small return angle of 6° for precise working. The knurl allows fast screwdriving in cramped situations, when there is no space for ratcheting. Easy left\/right switching. Ergonomically shaped ratchet head and lever. With Take it easy tool finder with colour coding by size - to help you find the required tool quickly and easily.\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\r\nHex Bits (2, 2.5, 3, 4, 5, 6mm)\u003cbr\u003e\r\nTorx Bits (T10, T25)\u003cbr\u003e\r\nPhilips Head\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\nTBC\u003c\/p\u003e\r\n","brand":"Wera","offers":[{"title":"Default Title","offer_id":42404068098264,"sku":"W-05004177001","price":109.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/wera-bicycle-set-9-mini-ratchet-set.jpg?v=1642568411"},{"product_id":"topeak-ratchet-rocket-lite-dx-plus","title":"Topeak Ratchet Rocket Lite DX+ Plus","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/topeak\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/topeak-logo_100x100.jpg?v=1603754247\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cp\u003eFeatures a fine tooth ratchet mechanism with reverse lever and thumb wheel for quick rotation and control in tight spots and includes hardened steel tools in 2, 2.5, 3, 4, 5, 6 and 8 mm hex, T10, T15, T25 Torx® and #2 Phillips bits, CrMo steel chain tool, two engineering grade polymer tire levers and magnetic bit holder. * The chain tool is compatible with single and multi-speed chains up to 12 speed, NOT including Campagnolo® hollow pin chains.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eRATCHET TOOL MATERIAL Chrome vanadium steel\u003cbr\u003e\r\nBAG MATERIAL Nylon\u003cbr\u003e\r\nScrewdriver, Secondary chain link fence, Air release button, Chain pin breaker, Leverage added, Patch pocket, Magnetic bit holder\u003cbr\u003e\r\nAllen bits - 2 \/ 2.5 \/ 3 \/ 4 \/ 5 \/ 6 \/ 8 mm\u003cbr\u003e\r\nTorx® bits - T10 \/ T15 \/ T25\u003cbr\u003e\r\n#2 Phillips screw driver, CrMo steel chain tool*, 2 polymer tire levers, Ratchet tool\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\n195g\u003c\/p\u003e\r\n","brand":"Topeak","offers":[{"title":"Default Title","offer_id":42576697917656,"sku":"TT2579","price":64.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/topeak-ratchet-rocket-lite-dx-plus.jpg?v=1646299903"},{"product_id":"topeak-ratchet-rocket-lite-ntx","title":"Topeak Ratchet Rocket Lite NTX","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/topeak\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/topeak-logo_100x100.jpg?v=1603754247\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe only thing missing is the kitchen sink! The Topeak Ratchet Rocket Lite NTX has everything you need to fix and make precise adjustments to your bike while on the road. Featuring a fine tooth ratchet mechanism with reverse lever and thumb wheel with Nano TorqBits for ease and torque accuracy in tight spots. Includes magnetic bit holder, hardened steel tools in 2, 2.5, 3, 4, 5, 6 and 8mm hex, T10, T15, T25 Torx®, #2 Phillips bits and two engineering grade polymer tire levers. The protective case keeps things organized and secure, and even has a pocket to carry glueless patches.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eNano TorqBit - 4 \/ 5 \/ 6 Nm\u003cbr\u003e Allen bits - 2 \/ 2.5 \/ 3 \/ 4 \/ 5 \/ 6 \/ 8 mm\u003cbr\u003e Torx® bits - T10 \/ T15 \/ T25\u003cbr\u003e #2 Phillips screw driver, 2 plastic tire levers, Ratchet tool\u003cbr\u003e RATCHET TOOL MATERIAL Chrome vanadium steel\u003cbr\u003e BAG Nylon\u003cbr\u003e Leverage added\u003cbr\u003e Magnetic bit holder\u003cbr\u003e Patch pocket\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e 233g\u003c\/p\u003e","brand":"Topeak","offers":[{"title":"Default Title","offer_id":42576708665560,"sku":"TT2580","price":112.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/topeak-ratchet-rocket-lite-ntx.jpg?v=1646300072"},{"product_id":"topeak-multispoke-wrench","title":"Topeak Multispoke Wrench","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/topeak\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/topeak-logo_100x100.jpg?v=1603754247\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cp\u003eLow Profile high strength steel spoke wrench easily works on 13G (3.5mm) \/ 14G (3.4mm) \/ 15G (3.2mm) and Shimano® (4.3mm) wheel set nipples to adjust spoke tension and true wheelset. NC machined for precise dimensions. \u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eSPOKE WRENCHES 13G \/ 14G \/ 15G \/ Shimano® 4.3 mm\u003cbr\u003e\r\nMATERIAL Hardened steel\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\n50g\u003c\/p\u003e\r\n","brand":"Topeak","offers":[{"title":"Default Title","offer_id":42576775086296,"sku":"TPSSP42","price":12.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/topeak-multispoke-wrench.jpg?v=1646301225"},{"product_id":"topeak-smartgauge-d2","title":"Topeak SmartGauge D2","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/topeak\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/topeak-logo_100x100.jpg?v=1603754247\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cp\u003eThe second-generation digital gauge features a rotating SmartHead® and works seamlessly with Presta and Schrader valves without changing parts. Precision digital gauge reads up to 250 psi \/ 17 bar and is designed for use with tires, suspension forks and rear shock units. LCD display can be programmed to show pressure in psi, Bar, or kg\/cm2.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cp\u003eHEAD SmartHead®, Fits Presta \/ Schrader valves\u003cbr\u003e\r\nGAUGE Digital - PSI, Bar, kg\/cm2\u003cbr\u003e\r\nBATTERY CR2032 x 1 (included)\u003cbr\u003e\r\nBODY Engineering grade polymer\u003cbr\u003e\r\nCAPACITY Reads 250 psi \/ 17 bar\u003cbr\u003e\r\nRotating head, Air release button\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\n65g\u003c\/p\u003e\r\n","brand":"Topeak","offers":[{"title":"Default Title","offer_id":42576786129112,"sku":"TSG02","price":50.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/topeak-smartgauge-d2.jpg?v=1646301426"},{"product_id":"shimano-tl-pd40-pedal-cone-nut-tool","title":"Shimano TL-PD40 Pedal Cone Nut Tool","description":"\u003cp\u003eShimano TL-PD40 tool to mount and dismount pedal spindles with plastic nut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eGlass reinforced resin\u003cbr\u003eFor use with 36mm wrench drive\u003cbr\u003eFor PD-7410, -6620, -6610, -6601, -6600, -6500, -R600, -5610, -6500, -5500, -R540, -R535, -M858, -M747, -M536, -M520, -M515, -M545, M434, -M424, -A530, -A252, -A520, -A515.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003eTBC\u003c\/p\u003e","brand":"Shimano","offers":[{"title":"Default Title","offer_id":42643914162392,"sku":"Y42A09000","price":1.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/ShimanoTL-PD40PedalConeNutTool.png?v=1732340300"},{"product_id":"shimano-tl-bh62-disc-brake-hose-cut-and-set-tool","title":"Shimano TL-BH62 Disc Brake Hose Cut and Set Tool","description":"\u003cp\u003eThe Shimano TL-BH62 cuts the hydraulic disc brake hose easily and precisely. It also sets the connector insert into the hydraulic disc brake hose easily and securely. The hardness of cable fixation is adjustable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eSpare blade is included in delivery.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003eTBC\u003c\/p\u003e","brand":"Shimano","offers":[{"title":"Default Title","offer_id":42707403702488,"sku":"Y13098570","price":84.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/ShimanoTL-BH62DiscBrakeHoseCutandSetTool.png?v=1732205451"},{"product_id":"shimano-deore-br-m615-disc-brake-pad-spacer","title":"Shimano Deore BR-M615 Disc Brake Pad Spacer","description":"\u003cp\u003eUseful for setting correct pad spacing when installing calipers or transporting bikes with their wheels removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003eTBC\u003c\/p\u003e","brand":"Shimano","offers":[{"title":"Default Title","offer_id":42889769320664,"sku":"Y84E03000","price":1.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/ShimanoDeoreBR-M615DiscBrakePadSpacer.png?v=1731113770"},{"product_id":"shimano-deore-br-m615-disc-brake-bleed-spacer","title":"Shimano Deore BR-M615 Disc Brake Bleed Spacer","description":"\u003cp\u003eThis Bleeding Spacer can only be used with Shimano Deore BR-M615 disc brake calipers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003eTBC\u003c\/p\u003e","brand":"Shimano","offers":[{"title":"Default Title","offer_id":42889774727384,"sku":"Y8J712100","price":2.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/ShimanoDeoreBR-M615DiscBrakeBleedSpacer.png?v=1731113628"},{"product_id":"sram-rear-derailleur-chaingap-adjustment-gauge-axs-and-mechanical","title":"SRAM Rear Derailleur Chaingap Adjustment Gauge - AXS and Mechanical","description":"\u003cp\u003eSRAM adjustment gauge for the chain gap of the rear derailleur - B Gap tool for SRAM Eagle 50\/52Z AXS and mechanical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003eTBC\u003c\/p\u003e","brand":"SRAM","offers":[{"title":"Default Title","offer_id":42889816146136,"sku":"SR117518099000","price":8.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/sram-rear-derailleur-chaingap-adjustment-gauge-axs-and-mechanical.jpg?v=1653352314"},{"product_id":"shimano-tl-br001-syringe-unit","title":"Shimano TL-BR001 Syringe Unit","description":"\u003cp\u003eThe TL-BR001 syringe can be used for an easy bleeding of all hydraulic Shimano disc brakes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e1 x Syringe\u003cbr\u003e1 x Hose\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003eTBC\u003c\/p\u003e","brand":"Shimano","offers":[{"title":"Default Title","offer_id":42969107595480,"sku":"Y13000080","price":48.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/ShimanoTL-BR001SyringeUnit.png?v=1732205601"},{"product_id":"jrc-emergency-derailleur-dropout-w-axle-nut","title":"JRC Emergency Derailleur Dropout W\/ Axle Nut","description":"\u003cdiv style=\"text-align:left\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/jrc-logo_160x160.jpg?v=1655781478\" style=\"float:none\"\u003e\u003c\/div\u003e\n\n\u003cdiv style=\"text-align:left\"\u003e \u003c\/div\u003e\n\n\u003cdiv style=\"text-align:left\"\u003e\n\u003cp\u003eExtremely practical for solo or group rides to get you home safely in the unfortunate event of derailleur\/hanger failure.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\nSuitable for almost all style bike frames.\u003cbr\u003e\nIncludes a safety nut to firmly thread into your skewer which fixes the hanger firmly in place\u003cbr\u003e\nExtended slotted section allows for a wide range of adjustment\u003cbr\u003e\nMade from high precision aluminium with high-quality black anodised finish allows hanger to be re-used time and time again\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eIncluded\u003c\/strong\u003e\u003cbr\u003e\nOne Aluminium Emergency Dropout\u003cbr\u003e\nOne Threaded Safety Nut\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\nTBC\u003c\/p\u003e\n\u003c\/div\u003e","brand":"JRC Components","offers":[{"title":"Default Title","offer_id":42995583615192,"sku":"SMP-0034-BLK","price":16.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/jrc-emergency-derailleur-dropout-w-axle-nut.jpg?v=1655940108"},{"product_id":"park-tool-vc-1-valve-core-tool","title":"Park Tool VC-1 Valve Core Tool","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/park-tool\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/park-tool-logo_small.png?v=1550711188\"\u003e\u003c\/a\u003e\u003cbr\u003e\r\nA small, handy tool designed to remove and install Schrader and Presta valve cores and to remove and install Presta valve extenders with 5mm wrench flats.\u003cbr\u003e\r\n\u003cbr\u003e\r\nNote: Not all Presta valve cores are removable.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\nTBC\u003c\/p\u003e\r\n","brand":"Park Tool","offers":[{"title":"Default Title","offer_id":42995751092440,"sku":"2557009999222","price":21.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/park-tool-vc-1-valve-core-tool.jpg?v=1656053452"},{"product_id":"park-tool-pp-1-2-hydraulic-brake-piston-press","title":"Park Tool PP-1.2 Hydraulic Brake Piston Press","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/park-tool\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/park-tool-logo_small.png?v=1550711188\"\u003e\u003c\/a\u003e\u003cbr\u003e\r\nThe unique, wedge-shaped PP-1.2 slides into a hydraulic disc brake caliper to preset the piston when replacing pads, aligning pads, and performing other service procedures. Makes hydraulic disc brake maintenance and repair faster and easier.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\r\nThe Park Tool PP-1.2 slides between the brake pads inside a caliper allowing the user to spread the pads and compress the pistons when servicing pads or wheels. The PP-1.2 expands the gap between the pads, making it easy to insert the disk between the pads when reinstalling a caliper or wheel. \"Sure Grip\" dual density handle provides a positive grip.\u003cbr\u003e\r\n\u003cbr\u003e\r\nThe PP-1.2 fits Shimano® XTR® caliper bodies.\u003cbr\u003e\r\n\u003cbr\u003e\r\nNOTE: Wedge-style piston tools, such as the PP-1.2, are not intended for use with ceramic pistons in Shimano® road disc brake calipers.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\nTBC\u003c\/p\u003e\r\n","brand":"Park Tool","offers":[{"title":"Default Title","offer_id":42995751157976,"sku":"2555099999222","price":39.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/park-tool-pp-1-2-hydraulic-brake-piston-press.jpg?v=1656053029"},{"product_id":"park-tool-dag-2-2-derailleur-hanger-alignment-gauge","title":"Park Tool DAG-2.2 Derailleur Hanger Alignment Gauge","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/park-tool\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/park-tool-logo_small.png?v=1550711188\"\u003e\u003c\/a\u003e\u003cbr\u003e\r\nThe DAG-2.2 is an indispensable shop tool that can be used to both measure and straighten misaligned derailleur hangers solving a high percentage of shifting problems.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\r\nGauge bar made of heavy gauge, chrome plated steel\u003cbr\u003e\r\nAdjusts to fit 20\" to 29\"+ wheels\u003cbr\u003e\r\nReplaceable threaded tip\u003cbr\u003e\r\nUpgraded large inner shaft for added strength*\u003cbr\u003e\r\nTighter tolerances for improved accuracy*\u003cbr\u003e\r\nImproved clearance and reach to fit more frame\/hanger combos including low clearance thru-axle derailleur hangers*\u003cbr\u003e\r\nCompatible with virtually all derailleur-equipped bicycles including Shimano® Direct Mount hangers\u003cbr\u003e\r\nLength: 16 inches (41cm)\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\nTBC\u003c\/p\u003e\r\n","brand":"Park Tool","offers":[{"title":"Default Title","offer_id":42995751551192,"sku":"2555039999222","price":170.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/park-tool-dag-2-2-derailleur-hanger-alignment-gauge.jpg?v=1656052531"},{"product_id":"park-tool-fr-5-2-cassette-lockring-tool","title":"Park Tool FR-5.2 Cassette Lockring Tool","description":"\u003cdiv\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/park-tool\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/park-tool-logo_small.png?v=1550711188\"\u003e\u003c\/a\u003e\u003c\/div\u003e\r\n\r\n\u003cdiv\u003e\r\n\u003cp\u003eDesigned for 12 spline 23.4mm diameter tool fittings - the most common tool fitting found on 7-12 speed cassette lockrings, and can also be found on some disc brake lockrings and Rock Shox® suspension fork top caps. Made from heat treated alloy tool steel. Thin wall construction allows use without removal of cones and locknuts.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/div\u003e\r\n\r\n\u003cdiv\u003eFits 12-spline cassette lockrings from Shimano®, SRAM® (including 1x), SunRace®, SunTour®, Chris King® and others\u003cbr\u003e\r\nFits most disc brake lockrings with 12 internal splines from Shimano® and other brands\u003cbr\u003e\r\nFits the top cap of some Rock Shox® suspension fork models including Pike®, Lyrik™, SID®, Revelation™, Reba®, and Paragon™\u003cbr\u003e\r\nHex-shaped base of tool fits 1\" (25.4 mm) socket or wrench\u003cbr\u003e\r\nCenter bore for axle clearance is 12mm\u003cbr\u003e\r\nAlways use a skewer or axle nut to hold tool firmly in place during removal and installation\u003c\/div\u003e\r\n\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\r\n\u003cdiv\u003e\n\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\nTBC\u003c\/div\u003e\r\n","brand":"Park Tool","offers":[{"title":"Default Title","offer_id":42995751583960,"sku":"2642520001222","price":17.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/park-tool-fr-5-2-cassette-lockring-tool.jpg?v=1655952841"},{"product_id":"park-tool-cn-10-pro-cable-housing-cutter","title":"Park Tool CN-10 Pro Cable \u0026 Housing Cutter","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/park-tool\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/park-tool-logo_small.png?v=1550711188\"\u003e\u003c\/a\u003e\u003cbr\u003e\r\nThe CN-10 Cable and Housing Cutter is a shop quality cutter designed specifically for use on all bicycle cables and housing, including hard-to-cut index housing.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\r\nCold forged, heat treated steel handles for strength\u003cbr\u003e\r\nPrecision ground cutting jaws for a clean cut on every cable\u003cbr\u003e\r\nBuilt in crimper for cable end caps and forming hole for reforming housing ends and housing ferrules\u003cbr\u003e\r\nWire latch holds handles together when not in use\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\nTBC\u003c\/p\u003e\r\n","brand":"Park Tool","offers":[{"title":"Default Title","offer_id":42995751616728,"sku":"2554549999222","price":69.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/park-tool-cn-10-pro-cable-housing-cutter.jpg?v=1656050870"},{"product_id":"park-tool-dh-1-dummy-hub","title":"Park Tool DH-1 Dummy Hub","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/park-tool\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/park-tool-logo_small.png?v=1550711188\"\u003e\u003c\/a\u003e\u003cbr\u003e\r\nAlso called a sleeping hub, the DH-1 slides into rear dropouts and replaces the rear wheel for chain cleaning and transport. The DH-1 works with all 5–13 speed derailleur chain and 1\/8\" width BMX and track chain. The unique design allows the bike to be shifted and works with open dropout and thru-axle frames up to 12mm.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\nTBC\u003c\/p\u003e\r\n","brand":"Park Tool","offers":[{"title":"Default Title","offer_id":42995751682264,"sku":"2555119999222","price":36.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/park-tool-dh-1-dummy-hub.jpg?v=1656051732"},{"product_id":"park-tool-dt-2-rotor-truing-fork","title":"Park Tool DT-2 Rotor Truing Fork","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/park-tool\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/park-tool-logo_small.png?v=1550711188\"\u003e\u003c\/a\u003e\u003cbr\u003e\r\nSpecially designed and precisely manufactured to gently adjust bent or damaged brake rotors. Each DT-2 features two different slot depths laser cut from high quality steel. Centered handle is vinyl dipped for comfort.\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\nTBC\u003c\/p\u003e\r\n","brand":"Park Tool","offers":[{"title":"Default Title","offer_id":42995751747800,"sku":"2556279999222","price":40.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/park-tool-dt-2-rotor-truing-fork.jpg?v=1655955040"},{"product_id":"park-tool-fr-5-2g-cassette-lock-ring-tool-with-guide-pin","title":"Park Tool FR-5.2G Cassette Lock Ring Tool With Guide Pin","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/park-tool\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/park-tool-logo_small.png?v=1550711188\"\u003e\u003c\/a\u003e\u003cbr\u003e\r\nA version of our dependable FR-5.2 with an added 5mm guide pin for added stability when removing lockrings from quick-release hubs. Designed for 12 spline 23.4mm diameter tool fittings - the most common tool fitting found on 7-12 speed cassette lockrings, and can also be found on some disc brake lockrings. Made from heat treated alloy tool steel.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\r\nFits 12-spline cassette lockrings from Shimano®, SRAM® (including 1x), SunRace®, SunTour®, Chris King® and others\u003cbr\u003e\r\nFits most disc brake lockrings with 12 internal splines from Shimano® and other brands\u003cbr\u003e\r\nHex-shaped base of tool fits 1\" (25.4 mm) socket or wrench\u003cbr\u003e\r\n5mm guide pin stabilizes tool when used with quick-release hubs\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\nTBC\u003c\/p\u003e\r\n","brand":"Park Tool","offers":[{"title":"Default Title","offer_id":42995751780568,"sku":"2659079999222","price":26.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/park-tool-fr-5-2g-cassette-lock-ring-tool-with-guide-pin.jpg?v=1656050321"},{"product_id":"park-tool-mb-1-magnetic-parts-bowl","title":"Park Tool MB-1 Magnetic Parts Bowl","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/park-tool\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/park-tool-logo_small.png?v=1550711188\"\u003e\u003c\/a\u003e\u003cbr\u003e\r\nThis bench top accessory keeps small parts accessible and all in one place. 6\" (15cm) in diameter and featuring an extra strong magnet, the MB-1 is available only in World Famous Park Tool Blue.\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\nTBC\u003c\/p\u003e\r\n","brand":"Park Tool","offers":[{"title":"Default Title","offer_id":42995751813336,"sku":"2555849999222","price":19.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/ParkToolMB-1MagneticPartsBowl.jpg?v=1655958108"},{"product_id":"park-tool-ph-1-2-p-handle-hex-wrench-set","title":"Park Tool PH-1.2 P-Handle Hex Wrench Set","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/park-tool\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/park-tool-logo_small.png?v=1550711188\"\u003e\u003c\/a\u003e\u003cbr\u003e\r\nEngineered for fit, function, and leverage, these L-shaped shop quality hex wrenches are a must have for every workshop.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\r\nHigh-torque, industrial steel wrenches\u003cbr\u003e\r\nStraight hex shaft on the short side, ball end on the long side\u003cbr\u003e\r\nIncludes 2, 2.5, 3, 4, 5, 6, 8, and 10mm\u003cbr\u003e\r\nComfortable, ergonomically designed nylon handles fit perfectly in your hand\u003cbr\u003e\r\nDurable wall\/pegboard mount tool holder allows easy access and organization\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\nTBC\u003c\/p\u003e\r\n","brand":"Park Tool","offers":[{"title":"Default Title","offer_id":42995751911640,"sku":"2690909999222","price":156.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/park-tool-ph-1-2-p-handle-hex-wrench-set.jpg?v=1656053357"},{"product_id":"park-tool-sw-15-three-way-internal-nipple-wrench","title":"Park Tool SW-15 Three Way Internal Nipple Wrench","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/park-tool\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/park-tool-logo_small.png?v=1550711188\"\u003e\u003c\/a\u003e\u003cbr\u003e\r\nOur innovative 3-way wrench featuring three different sized wrenches to fit internal spoke nipples.\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\r\n3.2mm square drive, with a nominal outside shaft diameter of 6mm\u003cbr\u003e\r\n5mm hex socket with a nominal outside shaft diameter of 7.5mm\u003cbr\u003e\r\n5.5mm hex socket with a nominal outside shaft diameter of 8mm\u003cbr\u003e\r\nSlips perfectly into the tight surroundings of most rims\u003cbr\u003e\r\nWorks with wheels made by numerous manufacturers including, but not limited to:\u003cbr\u003e\r\nFSA\u003cbr\u003e\r\nBlackwell\u003cbr\u003e\r\nPlanet-X\u003cbr\u003e\r\nHED\u003cbr\u003e\r\nRolf\u003cbr\u003e\r\nBontrager\u003cbr\u003e\r\nCampagnolo\u003cbr\u003e\r\nMavic\u003cbr\u003e\r\nGulo Composites\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\nTBC\u003c\/p\u003e\r\n","brand":"Park Tool","offers":[{"title":"Default Title","offer_id":42995752009944,"sku":"2556509999222","price":28.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/park-tool-sw-15-three-way-internal-nipple-wrench.jpg?v=1655953207"},{"product_id":"park-tool-tm-1-spoke-tension-meter","title":"Park Tool TM-1 Spoke Tension Meter","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/park-tool\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/park-tool-logo_small.png?v=1550711188\"\u003e\u003c\/a\u003e\u003cbr\u003e\r\nThe TM-1 Tension Meter accurately and reliably measures the absolute tension of each of the spokes in a wheel, as well as the relative tension between all the spokes in a wheel. Easy to use and priced affordably, the TM-1 works on nearly any bicycle spoke—no matter what the diameter, material, or shape. The TM-1 is for anyone building or truing wheels, diagnosing wheel problems, or assembling new bikes. It’s a tool that belongs on every workbench.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\r\nThe TM-1 Tension Meter includes a printed table to convert tension readings to kilograms force. For steel spokes not found on the printed table, you can generate custom conversion tables using the Wheel Tension App. The app also provides an interactive tool to help visualize and analyze relative spoke tension.\u003cbr\u003e\r\n\u003cbr\u003e\r\nPark Tool offers calibration and repair services to keep your TM-1 working optimally and accurately. For more information, see the TM-1 Service \u0026amp; Repair page.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\nTBC\u003c\/p\u003e\r\n","brand":"Park Tool","offers":[{"title":"Default Title","offer_id":42995752042712,"sku":"2556589999222","price":137.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/park-tool-tm-1-spoke-tension-meter.jpg?v=1656052052"},{"product_id":"park-tool-sr-2-3-sprocket-remover-chain-whip","title":"Park Tool SR-2.3 Sprocket Remover\/Chain Whip","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/park-tool\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/park-tool-logo_small.png?v=1550711188\"\u003e\u003c\/a\u003e\u003cbr\u003e\r\nThis shop quality chain whip gives you incredible leverage without worry of slippage, and the head is uniquely shaped to allow quick and accurate access to any cassette.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\r\nWorks on 7-speed to 12-speed mountain and road bike cassettes as well as single-speed cassettes with a 3\/32\" cog\u003cbr\u003e\r\nHardened bolts hold securely and make chain replacement easy\u003cbr\u003e\r\nHeavy duty, heat treated head\u003cbr\u003e\r\nRound vinyl coated handle\u003cbr\u003e\r\nThe SR-2.3 is approximately 15\" long (38cm)\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\nTBC\u003c\/p\u003e\r\n","brand":"Park Tool","offers":[{"title":"Default Title","offer_id":42995752075480,"sku":"2774669999222","price":69.49,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/park-tool-sr-2-3-sprocket-remover-chain-whip.jpg?v=1655956032"},{"product_id":"park-tool-fr-5-2gt-cassette-lockring-tool-with-12mm-guide-pin","title":"Park Tool FR-5.2GT Cassette Lockring Tool With 12mm Guide Pin","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/park-tool\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/park-tool-logo_small.png?v=1550711188\"\u003e\u003c\/a\u003e\u003cbr\u003e\r\nThis shop quality chain whip gives you incredible leverage without worry of slippage, and the head is uniquely shaped to allow quick and accurate access to any cassette.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\r\nWorks on 7-speed to 12-speed mountain and road bike cassettes as well as single-speed cassettes with a 3\/32\" cog\u003cbr\u003e\r\nHardened bolts hold securely and make chain replacement easy\u003cbr\u003e\r\nHeavy duty, heat treated head\u003cbr\u003e\r\nRound vinyl coated handle\u003cbr\u003e\r\nThe SR-2.3 is approximately 15\" long (38cm)\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\nTBC\u003c\/p\u003e\r\n","brand":"Park Tool","offers":[{"title":"Default Title","offer_id":42995752141016,"sku":"2691089999222","price":29.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/park-tool-fr-5-2gt-cassette-lockring-tool-with-12mm-guide-pin.jpg?v=1656051608"},{"product_id":"park-tool-csb-1-saw-blade-carbon","title":"Park Tool CSB-1 Saw Blade Carbon","description":"\u003cp\u003e\u003ca href=\"https:\/\/ccache.cc\/collections\/latest\/park-tool\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/files\/park-tool-logo_small.png?v=1550711188\"\u003e\u003c\/a\u003e\u003cbr\u003e\r\n12\" Tungsten steel hacksaw blade specially designed to smoothly cut carbon composite handlebars, forks, seat masts, seat posts, etc. Fits Park Tool SAW-1 Hacksaw and most 12\" hacksaws. The CSB-1 is designed for use with the SG-8 Saw Guide.\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eNOTE:\u003c\/strong\u003e Similar to a grinding stone, do not use this blade on aluminum\u003cbr\u003e\r\n\u003cbr\u003e\r\n\u003cstrong\u003eMfr Claimed Weight\u003c\/strong\u003e\u003cbr\u003e\r\nTBC\u003c\/p\u003e\r\n","brand":"Park Tool","offers":[{"title":"Default Title","offer_id":42995752239320,"sku":"2556289999222","price":16.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2348\/1571\/products\/park-tool-csb-1-saw-blade-carbon.jpg?v=1655955689"}],"url":"https:\/\/ccache.cc\/collections\/other-tools.oembed?page=22","provider":"CCACHE","version":"1.0","type":"link"}