absoluteBLACK Crank Bolt Covers for Ultegra R8000 - Grey - CCACHE
absoluteBLACK Crank Bolt Covers for Ultegra R8000 - Grey - CCACHE
absoluteBLACK Crank Bolt Covers for Ultegra R8000 - Grey - CCACHE
absoluteBLACK Crank Bolt Covers for Ultegra R8000 - Grey - CCACHE
absoluteBLACK Crank Bolt Covers for Ultegra R8000 - Grey - CCACHE
absoluteBLACK Crank Bolt Covers for Ultegra R8000 - Grey - CCACHE

Absoluteblack premium bolt covers are designed specifically for Shimano 110/4bcd Ultegra 8000 and Dura-Ace 9100 cranks. They cover the small step down between chainring and crank arms, completing the entire look of the crank. With these covers your crank looks great again.

Specifications
Compatibility: Dura-Ace 9100, 9150 Di2, Ultegra 8000, R8050 Di2. (also fit nicely with Rotor chainrings). NOT compatible with our Sub Compact chainrings
Material: 7075 T6 aluminium
Finish: Type II anodizing
Color: Ultegra Grey
4x covers and 4x T30 torx bolts
Made in Poland

Mfr Claimed Weight
13g

Installation
Remove your current bolts and nuts completely. Place the bolt covers into their specific positions from the front, so they sit nice and flush with crank. Then use provided short bolts with torx T30 sockets and screw them from the back. You should use about 5-7Nm of force.

Note: While tightening the provided bolts to the recommended torque, it is necessary to prevent the bolt covers from spinning, by holding them down with your fingers. If the covers are not held while torqueing the bolts, they might get damaged.

absoluteBLACK Crank Bolt Covers for Ultegra R8000 - Grey

$103.99 Sale Save

This is a "Final Sale" item and cannot be exchanged or returned for incorrect choice. Please choose carefully.


Colour Ultegra Grey

Loading stock location ..

Absoluteblack premium bolt covers are designed specifically for Shimano 110/4bcd Ultegra 8000 and Dura-Ace 9100 cranks. They cover the small step down between chainring and crank arms, completing the entire look of the crank. With these covers your crank looks great again.

Specifications
Compatibility: Dura-Ace 9100, 9150 Di2, Ultegra 8000, R8050 Di2. (also fit nicely with Rotor chainrings). NOT compatible with our Sub Compact chainrings
Material: 7075 T6 aluminium
Finish: Type II anodizing
Color: Ultegra Grey
4x covers and 4x T30 torx bolts
Made in Poland

Mfr Claimed Weight
13g

Installation
Remove your current bolts and nuts completely. Place the bolt covers into their specific positions from the front, so they sit nice and flush with crank. Then use provided short bolts with torx T30 sockets and screw them from the back. You should use about 5-7Nm of force.

Note: While tightening the provided bolts to the recommended torque, it is necessary to prevent the bolt covers from spinning, by holding them down with your fingers. If the covers are not held while torqueing the bolts, they might get damaged.